John C Garage CP3 Conversion Low Pressure Fuel Line Kit 2011-2016 LML

John C Garage has done it again with his innovative mindset on the LML platform. Introducing a low pressure fuel line kit that replaces the factory prone hard line for those doing a CP3 swap!

Install/Important Notes

100% Complete kit, Includes all necessary hardware, adapters, lines, clamps, and fittings needed to finish your install! 

When John C developed this kit, he kept in mind that the factory hard line that runs under the Y-Bridge has been known to randomly leak some time after a CP3 Conversion is done. 

What he has done has incorporated a thick, durable fuel line that will withstand the high temperatures and diesel fuel. This is not a standard line found in your local auto parts store. 

No modifications required! Simply remove the factory hard line and put this kit back in place. Turbo does not need to be removed or altered. 

Installation can be done in around 2HRs if your truck has previously had a CP3 Conversion kit done. You'll need to remove the Y-Bridge to remove the factory hard line.

The only specialty tool you will need is a 1/2" Quick Disconnect tool, which can be found at your local auto parts store. 

**Note, if you have the SDP CP3 conversion, you already have something very similar and you don't need this kit** 

Photos

2011 Example

2012-2016 Examples